Paranthaman Exporters
Perundurai, Tamil Nadu
Home»Our Products»

Water Well Drilling Rigs

We are offering a wide range of Water Well Drilling Rigs and mining Drilling Rigs, which is available in various models and sizes. Extensively used in construction and other engineering related industries, these are known for their international quality and performance. These rigs are offered in various technical specifications as per the client’s specific need.


Item Code: PRD-650

Technical Specifications
CAPACITY 6″ dia bore holes to a depth of 800 ft (190 mtrs)
PRIME MOVER Truck mounted rig with power from truck engine through truck power take off
WORK METHOD Rotation with direct circulation, nucleus destruction with bleeding by water, air or foam Box type structure
Max Capacity – 10 tons (22000 lbs)
Height – 7 mtr (23 ft)
Rod handling capacity – 4.5 mtr (15 ft)
Casing handling capacity – 3 mtr
PULL UP AND PULL DOWN By means hydraulic cylinder and wire rope, reeving Ratio 1:3
Max pull up force 5500 kg (12100 lbs)
Max pull up speed – 38mtr/min
Max pull down force – 5600 lbs (2600 kg)
Max pull down speed – 63mtr/min (207ft/min)
HYDRAULIC SYSTEM Max operating pressure – 210 kg / cm2 (3000 psi)
ROTARY HEAD Rotary head is powered by one hydraulic motor
Max torque – 19,600 in-lbs (225 kg-mtrs)
Max speed – 0 to 90 rpm
OPTIONAL ATTACHMENT Hydraulic motor driven or engine driven centrifugal mud pump
JACKS Four lug mounted type hydraulic jacks
WATER INJECTION PUMP Triplex reciprocating pump powered by hydraulic motor
BREAK OUT WRENCH To open the drill joints hydraulic break out wrench of 350 mm
stroke will be provided with rope attached
SUITABLE COMPRESSOR 650 cfm / 200 psi; 600cfm-200psi; 540cfm-180psi

Item Code: PRD-MAX-DRILL-2000

With our expertise in the respective domain, we are involved in offering a technologically advanced range of PRD Max Drill 2000. Fabricated in tandem with the set industry standards, these truck mounted rig gets power from truck engine through transfer gear box from a separate deck engine for better functionality. Our range is appreciated for its high pull-up speed and force. The rod changer with auxiliary winch equipped in the system can be manually operated single pivoted rod changer with 1000 Kg capacity pull-up.

Technical Specifications

CAPACITY 10″ dia bore holes to a depth of 605 mtr (2000 ft)
PRIME MOVER Truck mounted rig with power from truck engine through transfer gear box from a separate deck engine
WORK METHOD Rotation with direct circulation, nucleus destruction with bleeding by water,
air or foam drilling by drag bit (over burden) Roto percussion with DTH hammer
PULL UP AND PULL DOWN By means of twin hydraulic cylinders and wire rope, Reeving Ratio 1:3
HYDRAULIC SYSTEM 225 kg / cm2 / (3200 psi)
HYDRAULIC OIL COOLER 90 GPM fin type Cooler fan drive through hydraulic motor
JACKS Four box type hydraulic jacks
WATER INJECTION PUMP Triplex reciprocating pump powered by hydraulic motor
BREAK OUT WRENCH To open the drill joints break out wrench will be provided
with rope attached
OPTIONAL ATTACHMENTS Welding machine, mud pump, diesel filling pump , skid
platform with deck engine
SUITABLE COMPRESSOR 1100 cfm /350 psi, 1150 cfm / 300 psi, 900 cfm / 350 psi, 1200cfm / 320 psi
SPECIAL ATTACHMENT Automatic rod handling arrangement to handle 50 numbers of
20 ft drill rods with remote control
TWO TRUCK ARRANGEMENT One for rig unit and second to carry the compressor
SUITABLE MUD PUMP PRD 150 MODELStroke – 150 mm
Liner Size – 125 mm
Maximum working pressure – 21 Kg/cm2
Maximum displacement – 650 lpm / Suction size – 100 mm

 

Ex Stock Available Prd Max Drill Rig

  • Rig: max drill rig dth
  • Drilling capacity: 12 ‘’ dia up to 300 mtrs ; 6½’’ dia up to 600 mtrs
  • Compressor : elgi 1100/350
  • Truck : sino howo model lhd 6x4
  • Truckmud pump : prd 150 model mudpump

Item Code: PRD-Spider-1000

    PRD OZ Drill - TECHNICAL SPECIFICATIONS
    CAPACITY6 1/2" dia bore holes to a depth of 750 mtr
    PRIME MOVERTruck mounted rig with power from truck engine or seperate deck engine
    WORK METHODRotation with direct circulation, nucleus destruction with bleeding by air, water,foam by drilling by drag bit (over burden), and Rotary percussion with DTH hammer
    MASTBox type structure
    Max Capacity - 45 tons (100000 lbs)
    Height - 8 mtr ( 27 ft ) or 9 mtr ( 29.7 ft )
    Rod handling capacity - 6.1 mtr (20ft)
    PULL UP AND PULL DOWNBy means of Hydraulic cylinder and wire rope Reeving Ratio 1:3
    Max Pull up force - 20,000 kgs (44,000 lbs)
    Max Pull up speed - 18 mtr / min (60 ft / min)
    Max Pull down force - 13500 kg (29700 lbs)
    Max Pull down speed - 25 mtr/min (32 ft/min)
    ROTARY HEADRotary head powered by two hydraulic motors Max Torque - 1030 kgs - mtr (90,000 inch lbs) Max Speed - 0 to 100 RPM
    HYDRAULIC SYSTEM225 kg / cm2 / (3200 psi)
    HYDRAULIC OIL COOLER90 GPM fin type cooler fan drive through hydraulic motor
    BREAK OUT WRENCHTo open the drill joints hydraulic break out wrench will be provided with rope attached
    SPECIAL ATTACHMENTAutomatic rod handling arrangement to handle 50 numbers of 20ft Drill rods with remote control
    TWO TRUCK ARRANGEMENTOne for rig unit and second to carry the compressor
    JACKSFour box types Hydraulic jacks
    WATER INJECTION PUMPTriplex reciprocating pump powered by hydraulic motor
    OPTIONAL ATTACHMENTWelding machine, Diesel fuelling pump, Skid platform with deck engine, box type jack Automatic rod handling arrangement to handle 50 numbers of 20ft drill rods with remote control
    COROUSEL ROD CHANGERThe pivoted corousel rod changer with 6 rods handling capacity, hydraulic operated swing cylinder arrangement and which of one ton capacity to carry drill rods, castings and hammer tools
    SUITABLE MUD PUMPPRD 200 MODEL Duplex double acting high pressure PRD 200 Model Mud Pump (6*8) having flow capacity of 1200 LPM @ 40 Bar maximum pressure.
    SUITABLE COMPRESSOR1200 cfm / 350 psi / 1200 cfm / 330 psi

    Item Code: PRD-Speed-Stars

    PRD SPEED STAR – TECHNICAL SPECIFICATIONS
    CAPACITY 8″ bore holes to a depth of 363 mtr (1200ft)
    PRIME MOVER Truck mounted rig with power from truck engine through transfer gear box
    WORK METHOD Rotation with direct circulation, nucleus destruction with bleeding by water,
    air or foam. Drilling by drag bit (over burden) Roto percussion with DTH hammer
    MAST Box type structure
    Max Capacity – 18 tons (39600 lbs)
    Height – 8.20 mtr (27 ft)
    Rod handling capacity – 6.1 mtr (20 ft)
    PULL UP AND PULL DOWN By means of hydraulic cylinder and wire rope, Reeving Ratio 1:3
    Max Pull up force -10750 kgs (20,240 Ibs)
    Max pull up speed – 39 mtr/min (128ft/min)
    Max pull down force – 6318 kgs (13900 lbs)
    Max pull down speed – 50 mtr/min (167 ft/min)
    HYDRAULIC SYSTEM 210 kg / cm2 (3000 psi)
    HYDRAULIC OIL COOLER 70 GPM fin type cooler
    ROTARY HEAD Rotary head is powered by one hydraulic motor
    Max torque – 26,900 in – lbs (303kg – mtrs)
    Max speed – 0 to160 rpm
    JACKS Four Box type hydraulic jacks
    WATER INJECTION PUMP Triplex reciprocating pump powered by hydraulic motor
    BREAK OUT WRENCH To open the drill joints hydraulic break out wrench of 350 mm
    stroke will be provided
    ROD CHANGER Manually operated rod changer to handle single rods with 1000 kgs capacity
    pull up winch to carry drill rods, casings and hammer tools –four rods optional
    OPTIONAL ATTACHMENTS Welding machine, mud pump, diesel filling pump, skid platform with deck engine
    SUITABLE COMPRESSOR 1100 cfm – 300 psi; 1200cfm-320psi
    SUITABLE MUD PUMP PRD 125 MODEL
    Stroke – 127 mm
    Liner Size – 100 mm
    Maximum Working Pressure – 17.58 Kg/cm2
    Maximum displacement – 435 lpm

    Item Code: PRD-Magic-1000

    Technical specifications

    • Drilling Capacity : 1200 ft or 363 mtrs of 6½” dia bore hole using 3½″ OD drill Pipe
    • High pressure hydraulics powered by Ashokleyland deck engine
    • Controls : Remote hydraulic Joystick
    • Mounting option : TATA ACE Right Hand Drive
    • Weight : 2800 Kgs

    The comprehensive range of PRD Speed Stars drilling truck offered by us is widely used in construction and engineering related industries. These truck mounted rigs use power from truck engine through transfer gear box to ensure better performance. The rig has a box type structure with excellent rod handling capacity. The pull-up and pull-down functions are performed by means of hydraulic cylinder and wire rope in the equipment. We offer our products with additional attachments like welding machine, mud pump, diesel filling pump, and skid platform with deck engine.



    Other Information
    • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
    • Minimum Order Quantity: 1 Piece
    • Production Capacity: 4 Units
    • Delivery Time: 4 - 6 Weeks

    Technical Specification
    Capacity 6" dia bore holes to a depth of 800 ft (190 mtrs)
    Prime mover truck mounted rig with power from truck engine through truck power take off
    Work method           rotation with direct circulation, nucleus destruction with bleeding by water, air or
    foam box type structure 
    max capacity - 10 tons (22000 lbs)
     height - 7 mtr (23 ft)
    rod handling capacity - 4. 5 mtr (15 ft)
    casing handling capacity - 6 mtr (20 ft) 
    Pull up and pull down         by means hydraulic cylinder and wire rope, reeving ratio 1:3
    max pull up force 5500 kg (12100 lbs)
    max pull up speed - 38mtr/min
    max pull down force - 5600 lbs (2600 kg)
    max pull down speed – 63mtr/min (207ft/min)
    Hydraulic system   max operating pressure - 210 kg / cm2 (3000 psi)
    Rotary head     rotary head is powered by one hydraulic motor
    max torque - 19,600 in-lbs (225 kg-mtrs)
    max speed - 0 to 90 rpm
    Optional attachment hydraulic motor driven or engine driven screw type mud pump
    Jacks four lug mounted type hydraulic jacks
    Water injection pump triplex reciprocating pump powered by hydraulic motor
    Break out wrench   to open the drill joints hydraulic break out wrench of 350 mm
    stroke will be provided with rope attached
    Suitable compressor 650 cfm/ 200 psi; 600cfm-200psi; 540cfm-180psi



    Other Information
    • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
    • Production Capacity: 4 Per Month
    • Delivery Time: 3 - 4 Weeks

    Backed by state-of-the-art manufacturing facility, we have been able to develop a PRD Auto Loader as per the latest technological advancements. These are known for their high performance, sturdy construction, and heavy rod handling capacity. The rotary head is powered by one hydraulic motor to ensure optimum functionality.



    Other Information
    • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
    • Production Capacity: 3 per Month
    • Delivery Time: 6 - 8 Weeks

    We offer PRD Tractor Mounted Rigs, which are available in various models, sizes, and working capacities. The equipment is provided with water injection pump, hydraulic system, rotary head that helps in performing 4½" to 6½" dia. bore holes up to 150 mtrs (500 ft). Known for their excellent rod handling capacity, these are also provided with additional attachments such as screw / centrifugal mud pump driven by deck engine or hydraulic motor.



    Other Information
    • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
    • Minimum Order Quantity: 1 Piece
    • Production Capacity: 4 Per Month
    • Delivery Time: 3 - 4 Weeks

    Technical Specification
    CAPACITY   4½" dia bore hole up to 150 mtrs (500ft)
    6½” to 8” dia (in steps) bore hole up to 100 mtrs by rotary using Mud pump
    PRIME MOVER   Trolley mounted rig with power source for hydraulics from
    Suitable petrol / diesel deck engine   of 23 bhp
    WORK METHOD Rotation with direct circulation, nucleus destruction with Bleeding by water, air or foam
    MAST       Light duty channel structure
    Max Capacity - 8 tons (17600 lbs)
    Height - 3 mtr(10ft)
    Rod handling Capacity - 1.5 mtr(5 ft)
    PULL UP AND PULL DOWN       By means hydraulic cylinder and wire rope, reeving Ratio 1:2
    Max pull up force - 3500kg (7700 lbs)
    Max pull up speed – 7.8 mtr/min (25.5 ft/min)
    Max pull down speed – 10.5mtr/min (4.5ft/min )
    HYDRAULIC SYSTEM         By means hydraulic cylinder & wire rope, reeving Ratio 1:2
    Max pull up force - 3000kg(6600 lbs)
    Max pull up speed - 6.9 mtr/min (23 ft)
    Max pull down force - 2000 kg ( 4400 lbs)
    Max pull down speed – 10.5mtr/min (4.5ft/min )
    ROTARY HEAD SPEED   Rotary head is powered by one hydraulic motor 
    Max torque -146 kg - mtrs (12740 inch - lbs)
    Max speed - 0 to 25 rpm 
    JACKS Three Hydraulic jacks
    WATER INJECTION PUMP Triplex reciprocating pump powered by Hydraulic motor
    SUITABLE COMPRESSOR 450 cfm/150 psi, 540 cfm/180 psi, 600 cfm/ 200 psi
    OPTIONAL ATTACHMENT Screw type / centrifugal mud pump driven by diesel / petrol Engine or hydraulic motor
    SHIPMENT 20 feet container





    Other Information
    • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
    • Minimum Order Quantity: 1 Piece
    • Production Capacity: 10 Per Month
    • Delivery Time: 3 Weeks

    With our expertise in the respective domain, we are involved in offering a technologically advanced range of PRD Max Drill 2000. Fabricated in tandem with the set industry standards, these truck mounted rig gets power from truck engine through transfer gear box from a separate deck engine for better functionality. Our range is appreciated for its high pull-up speed and force. The rod changer with auxiliary winch equipped in the system can be manually operated single pivoted rod changer with 1000 Kg capacity pull-up.



    Other Information
    • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
    • Minimum Order Quantity: 1 Piece
    • Production Capacity: 3 per month
    • Delivery Time: 6 - 8 Weeks

    Our clients can avail from us a wide range of prd oz drill, which is powered by truck engine or separate deck engine. Based on latest technology, these drills are used to drill water wells, oil wells, or natural gas extraction wells. The rotation with direct circulation ensures that the drilling is done properly.



    Other Information
    • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
    • Minimum Order Quantity: 1 Piece
    • Production Capacity: 3 per month
    • Delivery Time: 6 - 8 weeks

    Technical Specification
    Capacity 6" dia bore hole upto 150 mtrs (500 ft)
    Prime mover   through pto drive from light commercial vehicle engine or separate deck
    engine
    Work method   rotation with direct circulation, nucleus destruction with bleeding by water, air  
    or foam
    Mast       medium duty channel structure
    max capacity - 12 tons (25000 lbs)
    height - 5 mtr (16. 5 ft)
    rod handling capacity - 3 mtr (10 ft)
    Pull up and pull down         by means hydraulic cylinder and wire rope, reeving ratio 1:2
    max pull up force - 5090 kg (11198 lbs)
    max pull up speed - 17 mtr/min (56 ft / min)
    max pull down force -7500 kg (7700 lbs)
    max pull down speed - 24 mtr/min (79 ft/min)
    Hydraulic system 160 kg / cm2 (2250 psi)
    Rotary head     rotary head is powered by one hydraulic motor
    max torque - 165kg - mtrs (14333 in - lbs)
    max speed - 0 to 80 rpm
    Water injection pump triplex reciprocating pump of 36 lpm 450 psi powered by hydraulic motor
    Jacks four hydraulic jacks
    Optional attachment screw / centrifugal type driven by diesel / petrol engine or hydraulic motor
    Compressor 540 / 185 or 650 / 200 compressor mounted as a separate vehicle

    Tractor rig / pilling rig – technical specifications
    Capacity 4½” to 6½” dia bore holes up to 175 mtrs ( 575 ft )
    Application water drilling, core drilling, reverse circulation drilling, pilling drilling & geo technology drilling
    Prime mover from tractor engine
    Work method rotation with direct circulation, nucleus destruction with bleeding by water,air or foam
    Mast Medium duty channel structuremax capacity – 10 tons (22000 lbs)
    Height – 5 mtr ( 16. 5 ft)
    rod handling capacity – 3 mtr (10 ft)
    Pull up and pull down by means hydraulic cylinder and wire rope, reeving ratio 1:2
    Max pull up force – 4500 kg (9900 lbs )
    Max pull up speed -15 mtr/min (49 ft / min )
    Max pull down force – 3000 kg ( 6600 lbs )
    Max pull down speed – 34 mtr/min ( 112 ft / min )
    Rotary head Rotary head is powered by one hydraulic motor
    Max torque – 150 kg – mtrs (13000 inch – lbs)
    Max speed – 0 to 80 rpm
    Hydraulic system 160 kg / cm2 ( 2250 psi )
    Jacks Three hydraulic jacks of dia 100 χ dia 63 χ 610 mm stroke
    Water injection pump Triplex reciprocating pump of 50 lpm / 1000 psi powered by hydraulic motor
    Break out wrench to open the drill joints hydraulic break out wrench of 350 mm stroke will be provided with rope attached
    Suitable compressor 450/150, 600/200, 650/200 or 540/185
    Optional attachment Dual speed rotary head can be supplied with torque 150 kg-mtr 40 kg-mtr and rotation speed changes accordingly. The above can be mounted on lcv and also same tractor mounted rig can be supply with pneumatic winch and rotation motor rig can be supplied with auxiliary winch and single rod changer hydraulic system will have the option of an oil cooler. The rig can also be supplied with screw / centrifugal mud pump driven by deck engine or hydraulic motor.

    Item Code: PRD-600

    Technical Specifications
    CAPACITY 6″ dia bore hole up to 150 mtrs (500 ft)
    PRIME MOVER Through PTO drive from light commercial vehicle engine or separate deck engine
    WORK METHOD Rotation with direct circulation, nucleus destruction with bleeding by water, air or foam
    MAST Medium duty channel structure
    Max Capacity – 12 tons (25000 lbs)
    Height – 5 mtr (16.5 ft)
    Rod handling Capacity – 3 mtr (10 ft)
    PULL UP AND PULL DOWN By means hydraulic cylinder and wire rope, reeving Ratio 1:2
    Max pull up force – 4300 kgs
    Max pull up speed – 17 mtr/min (56 ft / min)
    Max pull down force – 2900 kgs
    Max pull down speed – 24 mtr/min (79 ft/min)
    HYDRAULIC SYSTEM 160 kg / cm2 (2250 psi)
    ROTARY HEAD Rotary head is powered by one hydraulic motor
    Max torque – 165kg – mtrs (14333 in – lbs)
    Max speed – 0 to 80 rpm
    WATER INJECTION PUMP Triplex reciprocating pump of 36 lpm 450 psi powered by hydraulic motor
    JACKS Four Hydraulic jacks
    OPTIONAL ATTACHMENT Screw / centrifugal type driven by diesel / petrol engine or hydraulic motor
    COMPRESSOR 540 Cfm / 185 Psi or 650 Cfm / 200 Psi

    Item Code: PRD-500-Trolley

    Technical Specifications
    CAPACITY 4½” dia bore hole up to 150 mtrs (500ft)
    6½” to 8” dia (in steps) bore hole up to 100 mtrs by rotary using Mud pump
    PRIME MOVER Power source for hydraulics from Suitable petrol / diesel deck engine  of 23 bhp
    MOUNTING The rig unit is mounted on a suitable single axle trolley
    WORK METHOD Rotation with direct circulation, nucleus destruction with Bleeding by water, air or foam
    MAST Light duty channel structure
    Max Capacity – 8 tons (17600 lbs)
    Height – 3 mtr(10ft)
    Rod handling Capacity – 1.5 mtr(5 ft)
    HYDRAULIC SYSTEM By means hydraulic cylinder and wire rope, reeving Ratio 1:2
    Max pull up force – 3000kg(6600 lbs)
    Max pull up speed – 6.9 mtr/min (23 ft)
    Max pull down force – 2000 kg ( 4400 lbs)
    Max pull down speed – 10.5mtr/min (4.5ft/min )
    ROTARY HEAD SPEED Rotary head is powered by one hydraulic motorMax torque -146 kg – mtrs (12740 inch – lbs)
    Max speed – 0 to 40 rpm
    JACKS Three Hydraulic jacks
    WATER INJECTION PUMP Triplex reciprocating pump powered by Hydraulic motor
    OPTIONAL ATTACHMENT Screw type / centrifugal mud pump driven by diesel / petrol Engine or hydraulic motor
    SUITABLE COMPRESSOR 450 cfm/150 psi, 540 cfm/180 psi, 600 cfm/ 200 psi

    Item Code: PRD-OZ-DRILL

    Our clients can avail from us a wide range of PRD OZ Drill, which is powered by truck engine or separate deck engine. Based on latest technology, these drills are used to drill water wells, oil wells, or natural gas extraction wells. The rotation with direct circulation ensures that the drilling is done properly.

    Technical Specifications

    CAPACITY 6″ to 12″ dia bore holes to a depth of 750 mtr (2500 feet)
    PRIME MOVER Truck mounted rig with power from truck engine or seperate deck engine
    WORK METHOD Rotation with direct circulation, nucleus destruction with bleeding by air, water,foam by drilling by drag bit (over burden), and Rotary percussion with DTH hammer
    MAST Box type structure
    Max Capacity – 45 tons (100000 lbs)
    Height – 8 mtr ( 27 ft ) or 9 mtr ( 29.7 ft )
    Rod handling capacity – 6.1 mtr (20ft)
    HYDRAULIC SYSTEM 225 kg / cm2 / (3200 psi)
    HYDRAULIC OIL COOLER 90 GPM fin type cooler fan drive through hydraulic motor
    JACKS Four box types Hydraulic jacks
    WATER INJECTION PUMP Triplex reciprocating pump powered by hydraulic motor
    BREAK OUT WRENCH To open the drill joints hydraulic break out wrench will be provided with
    rope attached
    OPTIONAL ATTACHMENTS Welding machine, Diesel fuelling pump, Skid platform with deck engine,
    box type jack Automatic rod handling arrangement to handle 50 numbers of 20ft drill rods with remote control
    SUITABLE COMPRESSOR 1100 cfm, 350 psi / 1100 cfm, 300 psi / 900 cfm, 350 psi
    SPECIAL ATTACHMENT Automatic rod handling arrangement to handle 50 numbers of 20ft
    Drill rods with remote control
    TWO TRUCK ARRANGEMENT One for rig unit and second to carry the compressor
    SUITABLE MUD PUMP PRD 200 MODEL
    Duplex double acting high pressure PRD 200 Model Mud Pump (6×8) having flow capacity of 1200 LPM @ 40 Bar maximum pressure.

     

    Item Code: PRD-450

    The comprehensive range of Portable Water Well Drilling Rigs and Water Drilling Rigs of PRD 450 Portable offered by us are manufactured using high grade raw material, so that the end product is defect free. Appreciated for their excellent functionality, the rigs can also be altered to drill horizontal bores up to 300 feet. The unit is equipped with compressors, hydraulic system, and rotary head to ensure high speed and efficient performance.

    Technical Specification:
    DEPTH 4½” dia bore holes to a depth of 150 mtr (500 ft) using   3″ drill rod
    PRIME MOVER Diesel Deck engine of 15 bhp for hydraulic operated rig / from compressor air for Pneumatic operated rig
    WORK METHOD Rotation with direct circulation, nucleus destruction with bleeding By water, air or foam
    MAST Channel structure
    Max Capacity – 8 tons (17600 lbs)
    Height- 2.4 mtr (8 ft)
    Rod handling – 1.5 mtr(5ft)
    BASE Tripod base with 3 mechanical adjustable screw rods
    PULL UP SPEED 8.5 mtr / min (28 ft / min)
    PULL UP FORCE 2694 kg / 5926 lbs
    PULL DOWN FORCE 1814kg (3990 lbs)
    PULL DOWN SPEED 12.5mtr /min
    HYDRAULIC SYSTEM 140 kg / cm2 (2000 psi)
    REEVING RATIO 01:02:00 AM
    ROTARY HEAD Maximum Torque – 146 kg – mtrs (12740 inch – lbs)
    ROTARY HEAD SPEED 0 to 25 rpm
    ADDITIONAL FEATURES The same mast can be mounted on small truck for easy approach of difficult site condition this can also be altered to drill horizontal bores up to 300 feet
    OPTIONAL ATTACHMENT Screw type / centrifugal mud pump driven by diesel / petrol Engine or hydraulic motor
    SUITABLE COMPRESSOR 450 cfm/ 150 psi; 450 cfm / 175 psi; 600 cfm / 200 psi

    Item Code: PRD-AUTO-LOADER

    Supported by state-of-the-art manufacturing facility, we have been able to develop a PRD Auto Loader as per the latest technological advancements. These are known for their high performance, sturdy construction, and heavy rod handling capacity. The rotary head is powered by one hydraulic motor to ensure optimum functionality.

    Technical Specifications

    CAPACITY 6″ to 8″ borehole to a depth of 363 mtr (1200 ft) with DTH
    PRIME MOVER Truck mounted Rig with power from Truck Engine /deck Engine
    WORK METHOD Rotation with direct circulation, nucleus destruction with bleeding By air, water, foam by DTH, rotary using drag bit / rock roller bit in over burden
    MAST Box type structure
    Max Capacity – 20 tons (44,000 lbs)
    Height – 8 mtr (27 ft)
    Rod handling capacity – 6.1 mtr (20 ft)
    PULL UP AND PULL DOWN By means of Hydraulic cylinder and wire rope Reeving Ratio 1:3
    Max Pull up force  – 10750kgs (20240 lbs)
    Max Pull up speed  – 39 mtr/min (118 ft/min)
    Max Pull down force – 6318 kgs (13900 lbs)
    Max Pull down speed – 50mtr/min (167ft/min)
    HYDRAULIC SYSTEM 210 kg / cm2 / (3000 psi)
    HYDRAULIC OIL COOLER 90 GPM fin type cooler fan drive through hydraulic motor
    ROTARY HEAD Rotary head powered by one hydraulic motor
    Max Torque - 303 kg-mtr (26,000 inch – lbs)
    Max Speed -  0 to 150 rpm
    JACKS Four Hydraulic jacks, front two are box type
    WATER INJECTION PUMP Triplex reciprocating pump powered by hydraulic motor
    BREAK OUT WRENCH To open the drill joints hydraulic break out wrench will be provided
    OPTIONAL ATTACHMENTS Welding machine, Diesel fueling pump, Skid platform with deck engine, mud pump
    COMPRESSOR CAPACITY 1100 cfm, 300 psi; 1200cfm-320psi mounted on a separate skid or truck

     

    PRD SPEED STAR – TECHNICAL SPECIFICATIONS
    CAPACITY8″ bore holes to a depth of 363 mtr (1200ft)
    PRIME MOVERTruck mounted rig with power from truck engine through transfer gear box
    WORK METHODRotation with direct circulation, nucleus destruction with bleeding by water,
    air or foam. Drilling by drag bit (over burden) Roto percussion with DTH hammer
    MASTBox type structure
    Max Capacity – 18 tons (39600 lbs)
    Height  – 8.20 mtr (27 ft)
    Rod handling capacity – 6.1 mtr (20 ft)
    PULL UP AND PULL DOWNBy means of hydraulic cylinder and wire rope, Reeving Ratio 1:3
    Max Pull up force     -10750 kgs (20,240 Ibs)
    Max pull up speed    – 39 mtr/min (128ft/min)
    Max pull down force – 6318 kgs (13900 lbs)
    Max pull down speed – 50 mtr/min (167 ft/min)
    HYDRAULIC SYSTEM210 kg / cm2 (3000 psi)
    HYDRAULIC OIL COOLER70 GPM fin type cooler
    ROTARY HEADRotary head is powered by one hydraulic motor
    Max torque  – 26,900 in – lbs (303kg – mtrs)
    Max speed   – 0 to160 rpm
    JACKSFour Box type hydraulic jacks
    WATER INJECTION PUMPTriplex reciprocating pump powered by hydraulic motor
    BREAK OUT WRENCHTo open the drill joints hydraulic break out wrench of 350 mm
    stroke will be provided
    ROD CHANGERManually operated rod changer to handle single rods with 1000 kgs capacity
    pull up winch to carry drill rods, casings and hammer tools –four rods optional
    OPTIONAL ATTACHMENTSWelding machine, mud pump, diesel filling pump, skid platform with deck engine
    SUITABLE COMPRESSOR1100 cfm – 300 psi; 1200cfm-320psi
    SUITABLE MUD PUMPPRD 125 MODEL
    Stroke – 127 mm
    Liner Size – 100 mm
    Maximum Working Pressure – 17.58 Kg/cm2
    Maximum displacement – 435 lpm
    PRD SPEED STAR – TECHNICAL SPECIFICATIONS
    CAPACITY8″ bore holes to a depth of 363 mtr (1200ft)
    PRIME MOVERTruck mounted rig with power from truck engine through transfer gear box
    WORK METHODRotation with direct circulation, nucleus destruction with bleeding by water,
    air or foam. Drilling by drag bit (over burden) Roto percussion with DTH hammer
    MASTBox type structure
    Max Capacity – 18 tons (39600 lbs)
    Height  – 8.20 mtr (27 ft)
    Rod handling capacity – 6.1 mtr (20 ft)
    PULL UP AND PULL DOWNBy means of hydraulic cylinder and wire rope, Reeving Ratio 1:3
    Max Pull up force     -10750 kgs (20,240 Ibs)
    Max pull up speed    – 39 mtr/min (128ft/min)
    Max pull down force – 6318 kgs (13900 lbs)
    Max pull down speed – 50 mtr/min (167 ft/min)
    HYDRAULIC SYSTEM210 kg / cm2 (3000 psi)
    HYDRAULIC OIL COOLER70 GPM fin type cooler
    ROTARY HEADRotary head is powered by one hydraulic motor
    Max torque  – 26,900 in – lbs (303kg – mtrs)
    Max speed   – 0 to160 rpm
    JACKSFour Box type hydraulic jacks
    WATER INJECTION PUMPTriplex reciprocating pump powered by hydraulic motor
    BREAK OUT WRENCHTo open the drill joints hydraulic break out wrench of 350 mm
    stroke will be provided
    ROD CHANGERManually operated rod changer to handle single rods with 1000 kgs capacity
    pull up winch to carry drill rods, casings and hammer tools –four rods optional
    OPTIONAL ATTACHMENTSWelding machine, mud pump, diesel filling pump, skid platform with deck engine
    SUITABLE COMPRESSOR1100 cfm – 300 psi; 1200cfm-320psi
    SUITABLE MUD PUMPPRD 125 MODEL
    Stroke – 127 mm
    Liner Size – 100 mm
    Maximum Working Pressure – 17.58 Kg/cm2
    Maximum displacement – 435 lpm

     

     

    Paranthaman Exporters

    Manager
    Plot No. M- 8, SIPCOT, SEZ For Engineering Products
    Perundurai - 638052
    Tamil Nadu, India
    © Paranthaman Exporters. All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited