Paranthaman Exporters
Perundurai, Tamil Nadu
Send E-mail
Send SMS
Home»Our Products»

Exploration Rigs

Our expertise allows us to provide a wide range ofSilver Core Drilling, which is developed in tandem with the international quality standards. The unit is equipped with engine along with Splitter Gear Box that helps to drive variable displacement pumps during the operation. Available in varied capacity, speed and other technical specifications, these drills can also be customized as per the clients’ specific requirements.

REQUEST CALLBACK
Ask Latest Price
PRD MINI CORE DRILL – TECHNICAL SPECIFICATIONS
CAPACITYBQ…………..350mtr
NQ…………..300mtr
HQ…………..200mtr
PRIME MOVERPower for the Hydraulic is taken from the Suitable Deck Engine
MAST & FEED SYSTEMMast overall length – 6.4 Mtr
Head travel : 4. 5 Mtr
Reeving Ratio  – 1:2 (Chain feed system)
Pull up force  – 5,000 Kg
Pull down force  – 3,800 Kg
ROTARY HEADTwo speed Rotary Head powered by Hydraulic Motor gear type fixed displacement
High speed low Torque – 1000 rpm @ 300 Nm
Low Speed High Torque- 75 rpm @ 1000 Nm
LEVELLING JACKS4 Nos., lug mounted jacks provided for leveling with pilot operated check valve
WATER PUMPA separate engine driven triplex single acting water pump having flow capacity of 250 litres per minute and maximum pressure of 25 Kg/Cm2 is included
FOOT CLAMPHydraulic operated indigenous foot clamp
MAIN WINCHSingle line capacity –    Bare drum 3000 Kgs
Bare Drum Speed   –    45 Mtrs / Minute
Cable Size   –    16 mm of 15 Mtrs length
WIRELINE WINCHCapacity  –  500 Mtrs of 4.76 mm rope
Line pull  -  Bare Drum 1200 Kgs
Line Speed  –  Bare Drum 90 Mtr / Minute
BREAK OUT WRENCHThe hydraulic operated rigid break out wrench provided for easy breaking of rod joints and foot clamp for core drilling rods

Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price
 BQ,NQ,HQ
BQ…………..250mtr
NQ…………..200mtr
HQ…………..75mtr
CORE DRILLING 
Hard
Power for the Hydraulic is taken
from the Suitable Deck Engine
The rig unit is mounted on suitable crawler
Robust Frame
Max. Rod length Handling Capacity 3mtr.
Max rod pull up capacity: 6 mtr
0-650 rpm
390 Nm
3450 kg (7605 lbs)
22 mtr/min
3450 kg (7605 lbs)
22 mtr/min
Max. Operating pressure: 190 kg/cm2 (2750 psi)
Four Lug Mounted Hydraulic Jacks
Hydraulic operated
Capacity : 2 Ton                                                          Line Speed: 45mtr/min                                               
Capacity : .5 Ton                                                             Line Speed: 75 mtr/min                                               
Type : Triplex piston pump                                      Maximum flow : 43 lpm                                              Maximum Pressure : 400 psi


Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer)
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price
Truck /Track mounted core drilling rig
NQ 200 mtrs
3 mtr rod handling mast,Rod retrival 6 mtr
Pull Up Force 5,000 Kgs
Pull Down Force 3,800 Kgs
45 Degree angle drilling option
Hydraulic foot clamp
 2 speed drill head
3 ton main winch
1 Ton wire line with 250 mtr wire rope
High Pressure water Pump


Additional Information:
  • Minimum Order Quantity: 1 Unit
  • Pay Mode Terms: T/T (Bank Transfer)
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price
 BQ,NQ,HQ
BQ…………..250mtr
NQ…………..200mtr
HQ…………..75mtr
CORE DRILLING 
Hard
Power for the Hydraulic is taken
from the Suitable Deck Engine
The rig unit is mounted on suitable crawler
Robust Frame
Max. Rod length Handling Capacity 3mtr.
Max rod pull up capacity: 6 mtr
0-650 rpm
390 Nm
3450 kg (7605 lbs)
22 mtr/min
3450 kg (7605 lbs)
22 mtr/min
Max. Operating pressure: 190 kg/cm2 (2750 psi)
Four Lug Mounted Hydraulic Jacks
Hydraulic operated
Capacity : 2 Ton                                                          Line Speed: 45mtr/min                                               
Capacity : .5 Ton                                                             Line Speed: 75 mtr/min                                               
Type : Triplex piston pump                                      Maximum flow : 43 lpm                                              Maximum Pressure : 400 psi


Additional Information:
  • Minimum Order Quantity: 1 Unit
  • Pay Mode Terms: T/T (Bank Transfer)
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price
Truck /Track mounted RC drilling rig
Reverse Circulation drilling upto -200 mtr
5 mtr rod handling mast
Pull Up Force 10,750 Kgf
Pull Down Force 7,250 Kgf
Dual  Dump mast for 45 degree angle drilling
Cyclone attachment with sample splitter
On Board compressor 1200 cfm /350 psi
Optional attachment for Booster



Additional Information:
  • Minimum Order Quantity: 1 Unit
  • Pay Mode Terms: T/T (Bank Transfer)
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price
Truck /Track mounted Core drilling rig
NQ 1200 mtrs
6 mtr rod handling mast
Pull Up Force 13,700 Kgf
Pull Down Force 7,000 Kgf
Angle Dump mast for 45 degree drilling
Hydraulic foot clamp
4 speed drill head with hydraulic clutch
AMC 11 high pressure water pump
10  Ton main winch
2 Ton wire line with 1200  mtr wire rope


Additional Information:
  • Minimum Order Quantity: 1 Unit
  • Pay Mode Terms: T/T (Bank Transfer)
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

We are engaged in offering PRD Multistar Mining Rigs, which is capable to drill a diameter bore up to 600 mtr (2000 ft) by dth. These skid / crawler mounted rigs are run by the power supplied from deck engine both for track and rig unit. The rig has a web type structure with excellent rod handling capacity of – 6.1 mtr (20ft).



Additional Information:
  • Item Code: PRD-MULTISTAR
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price


Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price
DEPTH CAPACITY CORING (WIRE LINE OR CONVENTIONAL) B wire line 1500 mtrN wire line 1200 mtr
H wire line 750 mtr
P wire line 550 mtr (Depth are based on vertical hole)
MAIN HOIST Single line capacity: Bare drum 100 kN (22000 lb)Line speed: Bare drum 45 m/min (145 ft/min)
Cable size: 50 m (165 ft) x 16 mm Non-Twist
WIRELINE Capacity: 1000m (3300 ft) of 5 mm Non -TwistLine pull: bare drum: 10 kN (2200 lb)
Full drum: 3,0 kN (668 lb)
Line speed: bare drum 50 m/min (264 ft/min)
Full drum 180 m/min (594 ft/min)
MAST AND FEED SYSTEM Feed travel: 4 mtrs (13.2 ft)Feed speeds: fast and slow with variable control
Thrust: 70 kN (15 400 lb) 7 tons
Pull: 137 kN (30 240 lb) 13.7 tons
Drilling angle: 45 to 90 degrees
Rod pull length: 6,09 m (20 ft)
POWER UNIT Manufacture: CumminsModel: 6BTA
Volume: 6 cyl
Power: 125 kW (165 hp)
RPM: 2200
Engine type: Diesel turbocharged/after cooled
Cooling: Water
HYDRAULIC SYSTEM 180 cc Danfoss make closed loop pump for rotation &
piggy back147 cc variable displacement pump for other
applications
DRILL HEAD AND SPINDLE SPEEDS PRD model Hollow spindle rotary head driven by the Hydraulic
motor with following specification.
1st gear: Max Torque 4561 lbs-ft (6184 Nm) 4000psi (275bar) 0-196 RPM
2nd gear: Max Torque 2181 lbs-ft (2957 Nm) 4000psi (275bar) 0-410 RPM
3rd gear: Max Torque 1183 lbs-ft (1604 Nm) 4000psi (275bar) 0-756 RPM
4th gear: Max Torque 688 lbs-ft (933 Nm) 4000psi (275bar) 0-1300 RPM
CHUCK ASSEMBLY Type: hydraulic open, spring closedMaximum inside diameter: 117 mm (4 5/8 in)
Holding capacity: 1 8143 kg (40 000 lb)
ROD HOLDER Hydraulic Operated foot clamp with suitable jaws
DRILL BASE SUPPORTS Frame mounted rig designed to be mounted on a trackSupport: 4 extendable hydraulic jacks
Travel length: 1000 mm (sideways)
STANDARD EQUIPMENT Hydraulic mast dump -Hydraulic mast raiseMast in two sections -4 hydraulic leveling
Jacks of 1200mm stroke
Fuel tank 200 l (53 gal)
Hydraulic oil reservoir fill
Pump & filtration
HYDRAULIC MUD PUMP Max flow : 205 l/min (54 gal/min)Max pressure : 70 kg/cm² – (1000 psi)
RIG MOUNTING Rig unit is mounted on the suitable Crawler


Additional Information:
  • Item Code: PRD-HS
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

The comprehensive range of Mini Core Drill offered by us finds application in water wells, mineral exploration, core drilling, and reverse circulation. Manufactured as per the set industry norms, these drills are known for their high functionality. These are necessary for the speedy and effective work as the drill is powered by Perkins diesel engines.


Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Our organization is involved in offering Blast Hole Rigs, which are widely used in construction and other engineering related industries. Manufactured in line with the set industry standards under the supervision of our technical team, the rigs ensure high performance. Blast Hole Rigs are perfect for carrying out all types of drilling operations by DTH method in mines, quarries, and construction projects.


Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

We are one of the prominent manufacturers and exporters of PRD Double Supers as per the specific requirements of our customers. The rig can bore holes to a depth of 300mtr (1000 ft) with utmost precision. Equipped with hydraulic motor driven winch and mud pump, the rigs perform efficiently without any interruption.



Additional Information:
  • Minimum Order Quantity: 1 Piece
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Production Capacity: 4 Per Month
  • Delivery Time: 6 - 8 Weeks
Yes! I am Interested
View PDF
REQUEST CALLBACK
Ask Latest Price
Technical Specification
CAPACITY To drill 5inch dia hole by reverse circulation up to 400 mts depth
PRIME MOVER Track mounted with power of hydraulic & traction is taken from suitable separate deck engine
WORK METHOD Rotation with direct circulation, nucleus destruction with bleeding by water, by
Reverse circulation method with DTH hammer
MAST Box type structure with 2 Nos feed cylinder of adequate capacity and wire rope reeving of 1:2 ratio with angle drilling up to 45 degree.
Max Capacity – 45 Ton
Height – 9 mtr
Max rod Rod handling capacity – 6 mtr
PULL UP AND PULL DOWN By means of Hydraulic cylinder and wire rope Reeving Ratio 1:2
Max Pull up force – 25 Ton
Max Pull down force – 17 Ton
HYDRAULIC SYSTEM The hydraulic system consist of hydraulic reservoir. Filtration system, motor, pumps, cyinders, control valves for all function of drill rig and track drive. The hydraulic reservoir of 600 liters capacity with suction and return line filters is provided.
Max working pressure – 3000 psi
ROTARY HEAD Two speed rotary head is powered by two speed hydraulic motor with Swivel attachment for mud/water suitable for reverse circulatory and DTH drilling
Max Torque – 7830 NM ( 5800 FT/LBS)
Max Speed – 0 to 1200 RPM
JACKS Four box type hydraulic jaws
WATER INJECTION PUMP Triplex reciprocating pump powered by hydraulic motor
BREAK OUT WRENCH To break drill sting joints ,hydraulic breakout wrench of 350mm stroke will be provided with sliding attachment.
SUITABLE COMPRESSOR Suitable screw air compressor will be provided as per drilling requirements
OPTIONAL ATTACHMENTS Rod handling & loading device is optional
1. Automatic rod changing device (without compressor on deck)
2. Jib boom winch assembly (with compressor on deck mounting option)
A 500 kgs ton winch is provided to handle drill rods and other tools
CYCLONE Will be supplied for reverse circulatory drilling and will be mounted on the rig/ trolley. Riffle separator on demand

Yes! I am Interested
 
X

Download Brochure
Paranthaman Exporters

Paranthaman (Managing Director)
Plot No. M- 8, SIPCOT, SEZ For Engineering Products
Perundurai - 638052
Tamil Nadu, India
Send Email
© Paranthaman Exporters. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited